-
Do not expose plants, animals, things and people to the hot air blast of the stove for too long.
-
Install the stove in suitable locations for the prevention of fire and already pre-arranged for
safety.
-
The storage of the stove and the lining of all its parts (even those in ceramic) must be effected in
rooms without humidity and sheltered from bad weather.
-
Avoid setting the body of the stove directly on the floor. In case of wooden or inflammable
floors always put an insulating material between the stove and the floor.
-
The pellet stove is not a cooking top to cook or heat up food and drink.
-
Carry out all operations in maximum safety.
-
Do not place any object on the stove.
-
Do not place any washing or object or beings (animals, plants, etc.) to dry.
4 Regulations and declaration of conformity
The company states that ZF stove complies with the following directives and regulations for the CE
marking European Directive:
2004/108 CE
(EMC Directive) and subsequent amendments.
2006/95 CE
(Directive on the safety of electrical equipment LVD) and subsequent amendment.
305/2011
(the Construction Products Regulations CPR) and subsequent amendments.
European Standards: EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN
60335-2-102; EN 62233; EN 14785.
The installation and use of the stove must be met in all the local and national laws and all European
standards.
5 Warranty
Warranty conditions
ZF Ltd located in Dino Fochesato Street n.1 Meledo of Sarego (VI) guarantees its products for 2
years from the date of purchase, for manufacturing defects or faults. This warranty is void if the lack
of conformity is not reported within 2 months from the date of its detection.
ZF Ltd limits its liability to the supply of the stove, which has to be installed in accordance with the
best working standards, following the instructions contained in the provided manual supplied with
the product and in accordance with the laws in force. The installation must be carried out by
qualified staff under the responsibility of the person who instructs him, who will assume
responsibility for the final installation and the consequent good working of the installed product.
ZF Ltd disclaims any liability in case of non-observance of these precautions. The installer will have
to issue a
Declaration of conformity
of the installation in accordance with the best working
standards, in accordance with the laws in force.
Examples of installation technicians:
-
Authorized Service Centers technicians
-
Technicians and companies associated Anfus (National Association Stove Fitting)
-
Technicians adherent to national school training plans Fuspa
-
Your trusted technicians (qualified thermotechnics)
