cross-platform support for multiple industry-standard development environments
and frameworks, including GNU Radio and MATLAB/Simulink.
Refer to the following sections that apply to the driver of your choice to continue
setting up your device.
NI-USRP
Setting Up the Device
Ensure that all of your hardware components are powered off before installing.
1. Verify that you have all items included in your device kit and the following
additional items.
■
PXIe chassis
■
PXIe-8881 or other PXI controller
■
PXIe-8394 or other PXI bus extension module
■
Network switch
■
PCIe/MXI express cable
■
CAT 5E Ethernet cable
Note
Alternative configurations are possible. For example, the Ettus
USRP X410 can also be set up with a host PC and PCIe-8398 instead
of the PXI chassis, PXI controller, and PXI bus extension module.
2. Set all items on a flat surface near power outlets and a modem or router.
3. Follow the instructions included with your network switch to connect it to a
modem or router.
4. Connect any additional attachments required for your project to the front
panel terminals of the Ettus USRP X410.
ni.com
10
Ettus USRP X410 Getting Started Guide
