ettus USRP X410, Getting Started Manual

Page: 6 / 26

Ettus USRP X410 Front Panel, Back Panel, and LEDs
Figure 2. Front Panel
TX/RX 0 TX/RX 0
TX OUTPUT MAX +15 dBm, RX INPUT MAX +20 dBm, ALL RF PORTS 50 Ω
RX 1 RX 1
DB 1 DB 0
RF 0 RF 1
TX/RX 0 TX/RX 0
TX OUTPUT MAX +15 dBm, RX INPUT MAX +20 dBm, ALL RF PORTS 50 Ω
RX 1 RX 1
RF 0 RF 1
GPIO 0
Ettus USRP
X410
3.3 VDC MAX
GPIO 1
3.3 VDC MAX
ESD
SENSITIVE
ESD
SENSITIVE
2-Channel RF
1 MHz to 7.2 GHz
Transceiver
400 MHz BW
2-Channel RF
1 MHz to 7.2 GHz
Transceiver
400 MHz BW
Connector Description
DB 0,
DB 1
RF 0 TX/RX 0 Output and input terminal for the RF signal. TX/RX 0 is an SMA (f)
connector with an impedance of 50 Ω and is a single-ended input or
output channel.
RX 1 Input terminal for the RF signal. RX 1 is an SMA (f) connector with an
impedance of 50 Ω and is a single-ended input channel.
RF 1 TX/RX 0 Output and input terminal for the RF signal. TX/RX 0 is an SMA (f)
connector with an impedance of 50 Ω and is a single-ended input or
output channel.
RX 1 Input terminal for the RF signal. RX 1 is an SMA (f) connector with an
impedance of 50 Ω and is a single-ended input channel.
GPIO 0, GPIO 1 General Purpose Input/Output (GPIO) digital terminals. GPIO 0 and GPIO
1 are HDMI Type-A connectors. Output voltage can be configured per
individual connector, either 1.8 V (default), 2.5 V, or 3.3 V.
Table 1. Front Panel Connector Descriptions
Figure 3. Back Panel
CONSOLE
ETHERNET
POWER
USB to PS GPS ANT
IN –15 dBm MAX
OUT 3.3 V DC
PPS IN
0
0
QSFP28 iPass+ zHD
1
1
3.3 V
–3 V MIN, 5 V MAX
TRIG IN/OUT
3.3 V
–2 V MIN, 5 V MAX
REF IN
+15 dBm MAX
10/100/1000
12 V DC 16A MAX
RESET
LED 1
LED 0
PWR
LED 2
JTAG
XXXXXXX–XX AIRFLOW:
XXXXXXX EXHAUST
Connector Description
iPass+ zHD Provides a PCIe connection to a host PC for using the device with LabVIEW FPGA.
Port 0 can be used alone for a Gen 3x4 connection. Port 0 and Port 1 can be used
together for a Gen 3x8 connection.
QSFP28 Supports multiple configurations for streaming high-speed, low-latency data,
depending on the FPGA image loaded. Designed for speeds of up to 25 Gbps
per lane with 4 lanes in each connector and a bandwidth of up to 100 Gbps per
connector.
ni.com
6
Ettus USRP X410 Getting Started Guide