■
10 Gb Ethernet network card or 100 Gb Ethernet network card
Tip
NI recommends using an Ethernet network card available in
connectivity kits sold on www.ettus.com and ni.com.
■
30 dB attenuator
Note
If you directly connect or cable a signal generator to
your device, or if you connect multiple devices together, use an
attenuator to avoid damaging the device.
■
SCA-14100 RF Signal Conditioning Accessory (optional)
Note
Refer to the SCA-14100 Getting Started Guide for information
on including this acessory in your setup.
■
Ettus USRP X410 Mounting Bracket Kit (optional)
Note
Refer to the Ettus USRP X410 Mounting Bracket Kit diagrams
**here** to visualize how to setup your device(s) using this kit.
Verifying the System Requirements
To use NI-USRP or UHD, your system must meet certain requirements.
Refer to your driver's readme for more information about minimum system
requirements, recommended system, and supported application development
environments (ADEs). The NI-USRP Readme is available online on the driver
software download page or at ni.com/manuals. The UHD Readme is available on
The USRP Hardware Driver Repository.
© National Instruments
5
Ettus USRP X410 Getting Started Guide
