Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
4. When the installer completes, select
Restart
in the dialog box that prompts
you to restart, shut down, or restart later.
Programming the Device
You can use the NI-USRP instrument driver to create communications applications
for the Ettus USRP X410.
Updating the File System
A file system update is required to use your device with NI-USRP.
Use the Windows Command Prompt to establish an SSH connection and update
your file system, then use the NI-USRP Configuration Utility to write the new FPGA
image to your device.
1. On your host PC running Windows 10 version 1809 or later, select
Start
»
Windows System
»
Command Prompt
to open the Windows Command Prompt.
2. To print information about your device, run the commands
cd “C:\Program Files (x86)\National Instruments\NI-USRP\utilities” then
uhd_find_devices.exe.
Information about your device is output in the command prompt window, as
shown in the following example.
Device Address:
serial: 32190B5
addr: 10.89.8.21
claimed: False
fpga: X4_200
© National Instruments
15
Ettus USRP X410 Getting Started Guide
