15
INTRODUCTION
4. POWER Switch
Both the POWER switch in the cab and the EMER-
GENCY STOP switch in the rear panel must be ON
for the control system to be ON.
The entire system can be shut down by turning
either switch to OFF. Before turning either switch ON
be sure you know what will automatically activate.
5.) Joystick
The Joystick shifts the spray bar left and right, and
moves it up and down. If the spray bar is latched, the
spray bar cannot shift left or right.
6. USB Charging Port
The USB port is a 5-volt charger for USB devices.
FOR CHARGING PURPOSES ONLY!!
7. Left Bar
(Variable Width Bar only)
For variable bar units, the left bar thumbwheel will
shift the left spray bar left or right at four-inch incre-
ments.
8. Right Bar
(Variable Width Bar only)
For variable bar units, the right bar thumb wheel
will shift the right spray bar left or right at four-inch
increments.
9. Left Taper
If the Taper Switch paid option is activated, the left
thumbwheel will move the left taper position in either
direction.
10. Right Taper
If the Taper Switch paid option is activated, the right
thumbwheel will move the right taper position in ei-
ther direction.
11 USB Data Port
FOR DATA PURPOSES ONLY! (See page 44)
12.
TOUCH SCREEN DISPLAY
a.) Gear Icon
b.) Lights Icon
c.) English / Metric units
d.) Approximate volume of Material in Tank
(Gallons or Liters)
e.) Home Button
f.) Faults Disabled Icon
g.) Bar Latch Icon
h.) Handrails Up Icon
i.) USB Icon
j.) Burner Control Icon
k.) Spray Icon
l.) AUTO / MANUAL Pump Control Icon
m.) Asphalt Pump Speed (GPM or LPM)
n.) Cab Speaker Volume
