ETC IRIDEON, Installation And User Manual

Page: 68 / 84

64 Astronomical Time Clock installation instructions
Step 10: Following the label chart on the left side of the ATC, connect
Earth Ground, Line and Neutral.
Step 11: Attach the DATA wires pulled from the ATC to P3 on the MCP
using the following pin/wire code:
Step 12: On the MCP, find the fuse assembly (R180) directly above P3
on the MCP and remove it from the assy.
Step 13: Attach the DC Power wires pulled from the ATC to P2 on the
MCP using the following pin/wire code:
Pin Wire (CAT 5) Belden 9729
data + White/Orange Red
data - Orange Black
Gnd Brown Drain
Pin
Wire
(Belden 8461) Wire
(Belden 8790)
+ (24vdc) Black Red
- (Gnd) White White
+ Gnd -
R180
F172 F172
+ -