ETC IRIDEON, Installation And User Manual

Page: 49 / 84

Irideon Control Installation and User Manual 45
• Verify fixture address of the remote station matches the
address entered in the configuration screen of the Com-
poser Software on the PC. Refer to the
Composer Soft-
ware User’s Guide for address settings.
N o t e :
Remote station address switches are located behind the stations
faceplate.
• Perform the MCP system test and compare the 2-button
and 8-button remote’s LED activity. Details of the test
procedure for your particular station can be found in
Chapter 4 of this manual.
• If errors occur with one station and not with others, re-
place the station. Contact your Dealer or ETC Technical
Services for further assistance.
• If errors occur with all stations, replace the MCP circuit
board. Contact your Dealer or ETC Technical Services
for further assistance.
If it becomes necessary or desirable to return an item to an authorized
service center, a Return Material Authorization (RMA) must be obtained
prior to shipment. Items will not be accepted without an RMA number.
Contact your Dealer or ETC Technical Services for further assistance.