ETC IRIDEON, Installation And User Manual

Page: 54 / 84

50 Maintenance
Liquid Crystal Display (LCD) Replacement
The LCD Display is mounted to the back side of the MCP or DMX
Interpreter center control panel. A ribbon cable connects the display to the
main circuit board. It is necessary to lift the center panel and unplug the
ribbon cable prior to moving the panel away.
To remove and replace the LCD:
Step 1: Remove the three screws from the left front panel.
Step 2: Set left panel aside.
Step 3: Remove the three screws from the right front panel.
Step 4: Set right panel aside.
Step 5: Remove the four screws from the center front display panel.
Step 6: Carefully lift the center panel and unplug the ribbon cable from
the back of the LCD.
P1
UNPLUG
HERE