ETC IRIDEON, Installation And User Manual

Page: 73 / 84

Irideon Control Installation and User Manual 69
Keypad Description and Function:
• MASTER RESET - Clears time and program
• Display will show “MEM CLR.” The reset switch is ac-
cessed by inserting a pointed object, such as a paper
clip, into the reset hole to the right of the keypad.
• PROGRAM - This key allows the user to add, delete or change
parameters (events, time, holidays, etc.).
• When pressed from the RUN mode, the programming
menu is displayed starting with the TIME menu header.
• When pressed from a menu header, the control will ad-
vance to the next menu header.
• When pressed from a programming step, the control re-
turns to that menu header.
• When pressed during review, the control will go to the
appropriate programming display.
• REVIEW - This key allows the user to review all the programmed steps
using displays condensed to show as much information as possible on
one display. The user will not be able to change the program in the
Review mode.
• When pressed from the RUN mode or any program-
ming step within a menu header, the control will return
to the TIME menu header.
• When pressed from any menu header during review,
the control will move to the next menu header.
• When pressed from a review step, the control returns to
that menu header.
• RUN - This key will return the control to the RUN mode.
• From all programming steps (excluding the override
menu), the control will perform a status update and re-
turn to the RUN mode.