p. 82 Esmach S.p.A. Grisignano di Zocco (VI) - I
SPI 30-200 F
Instructions for use
and maintenance
- lower the bowl cover ( Picture B)
- connect the end extremities of the lifting belt to the lifting device (Picture C); with the lifting belt centered
between the spiral arm and the column of the base (elements, not allowing the side motion of the belt), the
load results to be well balanced.
After completing this operation, it is necessary to lift up the cover before driving out the lifting belt and
then to move the belt towards the spiral arm to avoid that the eyebolt, in taking the belt off, remains fixed in
between the flour guard and the head of the base.
Picture 9 – Maschine Lifting up by means of a lifting Belt
Lift slowly the machine avoiding any impact and swinging.
Rest the machine on the ground, in a safe and protected room free from any risk of damage.
Once placed on the ground the machine can be moved in pushing it, as it is equipped with 3 caster wheels.
In positioning the machine, keep sufficient free space all around it in order to operate in a comfortable way
during the normal production ( 1 m per each side is normally sufficient).
With reference to Picture 10, fix the machine in the room where it shall be used, by using the support feet
(1):
- unloose the lock nut (2) by means of a hallen wrench;
- rotate the foot (1) clockwise (overhead view) by means of a hallen wrench in the shaft facets(3); this
operation is to carry out in the same way for both feet;
- when the front wheel (5) will be unloaded from the weight of the machine, lock each foot in tigthen the nut
(2); keep the threaded shaft (4) fixed by means of the wrench introduced in the facets (3)
Should it be necessary to move the machine again ( for example to clean the floor), a reverse operation is to
be carried out, i.e. through the unloading of the weight from the feet and placing the machine on the caster
wheel (5)
Picture 10 - Support Feet
A
B
C
2
4
3
1
5