p. 88 Esmach S.p.A. Grisignano di Zocco (VI) - I
SPI 30-200 F
Instructions for use
and maintenance
M Version
(ELECTRO-MECHANICAL CONTROLS; see picture below)
To let the machine operate continuously in1
st
speed, put the selector (11) in position 1.
To let the machine operate continuously in 2
nd
speed, put the selector (11) in position 2; before switching to
the 2
nd
speed, the machine shall operate in 1
st
speed for the minimum working time ( 2 minutes or 2
seconds depending on the bowl cover, i.e. grid or full cover)
Through the selector (13) it is possible to reverse the rotation direction of the bowl or to stop it ( for all
models, except for SPI 30 and SPI 45)
3.3.4 “
AUTOMATIC” OPERATION MODE
E
Version (ELECTRONIC CONTROLS )
To switch to AUTOMATIC operating mode, press the button (16) twice; the diplays (2) and (5) show “000”
and “000”.
Press the button (11) (the led (12) is on, then press again the button (9) until the number”0” is shown on the
display (8).
Set the 1
st
speed operating time on the display (2): press the button (3) to increase it, the button (4) do
decrease it.
Set the 2
nd
speed operating time on the display (5): press the button (6) to increase it, the button (7) do
decrease it.
To start the machine, press the button (15). The time on the display (2) decreases progressively; when it
reaches the 0 (zero), the machine switches automatically to the 2
nd
speed and starts decreasing the time on
the display (5).
To switch to the 2
nd
speed before the elapsing of the time set for the 1
st
speed, it is necessary to set to zero
the count on the display (2) in pressing the button(4); this shall be possible if the machine has already
operated at 1
st
speed for the minimum time foreseen for the default ( 2 minutes or 2 seconds, depending on
the type of cover the machine is equipped with, i.e. grid or full cover).
To stop the machine keeping in storage the elapsed time, press the button (16) once, to re-start press the
button (15) ( the count of time starts again from the point it was interrupted).
To stop the machine and set to zero the operating time already elapsed, press the button (16) twice; the
time set at the beginning will appear again on the displays (2) and (5)
