[email protected] phone +39 0444 419762
www.esmach.com
p.
99
English
IMPORTANT NOTICE!
A too tensioned belt is destinated to wear out quickly; if , instead, it is too loosen it does not carrry
out the function requested and does not transmit any motion.
Picture 13 – Correct Belt Tensioning
4.3.2 HOW TO REACH THE SPIRAL AND BOWL TRANSMISSION BELTS AND THEIR TENSION
ADJUSTMENT SYSTEMS
With reference to Picture 14,
to reach the spiral transmission belts,
disassemble the head cover
(1) as
follows : unscrew the 2 screws (2) and remove the cover from the carter (3).
To re-assemble the cover (1), introduce the board under the cover (3) (see Picture A), and fix it by using the
screws (2).
Picture 14 – Access to the Spiral Belts
With reference toPicture 15,
to reach the bowl transmission belts,
disassemble the carters (1); in some
models these covers are in number of two for each side of the machine: unscrew the screws (2) (they do
not release from the carter). In re-assembling the carters (1) fix them by using the screws (2).
Picture 15 – Access to the Bowl Belts
D
L
F
1
2
3
1
1
2
2
A
3
