p. 76 Esmach S.p.A. Grisignano di Zocco (VI) - I
SPI 30-200 F
Instructions for use
and maintenance
Picture 2 - E Version: Control Panels and Control Devices
M
Version (ELECTRO-MECHANICAL CONTROLS )
With reference to Picture 3, the control devices, besides the main power switch Ref. 18 – Picture 4, are :
(1) Control panel
(2) Electromechanical display (timer) to set the 1
st
speed working time
(5) Electromechanical display (timer) to set the 2
nd
speed working time
(11) Selector to activate alternately the following operation mode:
- pos. 1: the machine operates non-stop in 1
st
speed; the timers are excluded
- pos. 2: after an initial operating at 1
st
speed for a time of 120 seconds, the machine operates non-stop
in 2
nd
speed; the timer are excluded
- pos.
: both timers are enabled; its operating is based on the set up times, except for the first 120”
during which the machine operates in 1
st
speed
(13) (SPI 60-80-100-130-160-200 only) 3-position-selector for the bowl rotation direction
Left hand position= counter-clockwise (overhead view); central position= bowl still; right hand position=
clockwise (overhead view )
(15) Start button (start)
(17)
Emergency
stop button ( red mushroom-headed button on a yellow base); once pressed, it remains in
this position, allowing the stop of the machine and setting to zero the electric power of each of its parts
(21) (SPI 60-80-100-130-160-200 only) bowl rotation “dead man” button (after releasing it, the bowl stops) ;
it is normally used for impulse rotation of the bowl.
.
SPI 60-80-100-130-160-200