Page
27
of
32
The output adjustment pressure may be set incorrectly.
Measure output adjustment pressure and correct if incorrect
There may be a narrowing of the diameter in the output
sensing line.
Check that there's no contraction in the output sensing line.
The SSD setting pressure may be set incorrectly.
Measure the SSD adjustment pressure and correct it if it is
incorrect.
The product may not be installed correctly.
Try to re-install the product.
The problem may not have been detected.
Replace with a new product
PD increase by Q> 0
Broken membrane
Replace
What to do in case of gas smell:
If you smell gas in the line where the product is installed or if the gas alarm devices in the environment where the product is
located give signals and alarms, remain calm and carry out following procedures.
- Turn off the gas source from the main gas control-valve and / or storage tank (if LPG),
- Starting from the nearest; close the gas valves and gas appliances,
- Open the doors and windows to increase ventilation,
- Do not use any substances which may cause combustion (cigarettes, lighters, matches, etc.), extinguish all open fires and
smoky substances, sources that may create sparks and fires, do not re-start,
- Do not touch, turn on or off any electrical equipment, do not play with plugs (fuses, doorbells, power buttons, etc.) (leave open
ones on, and closed ones off.)
- Do not use mobile phones and radios against the risk of sparks,
- Extinguish fire, if any.
If the cause of the gas leak has been determined and eliminated after the aforementioned procedures are carried out, you can
instruct authorized fitters to open the valves and devices you had closed by consulting the relevant places (gas distribution
company-fitter, etc.). Before the gas is re-released, you STRICTLY must inform all inhabitants of the building that the gas will be/
has been re-opened.
If there is an inflammation in the gas environment, it is useless and very dangerous to try to extinguish the flames without cutting
off the incoming gas from the valves.
15. PHYSICAL LIFE
The product
’s physical life is
5 years.
The physical life is valid if any operation and status having been made on the product has been carried out in accordance with this
with this manual.
Replace the product when the physical life expires.
Summary of Contents for ERG-H5
Page 19: ...Page 19 of 32 Figure 11...
Page 20: ...Page 20 of 32...