Page
23
of
32
12. PACKAGING, HANDLING, TRANSPORT AND STORAGE
- In order to prevent any damages on the product during handling and transportation; our company places the products into single and
multiple special cartoon boxes and delivers to the customer.
- Carry out the loading-unloading-lifting-storage operations properly. The product may not function properly if the product will be
exposed to throwing, excessive shaking, tipping, falling, impact, overload, force, applying weight onto the product, damage of external
parts and outer protrusions, wetting and tipping, etc. In such cases, our company shall not be held responsible.
- Do not expose the product to direct sunlight.
- Store in closed, ventilated, shaded, dry and clean environment conditions.
- Ensure that products are protected from rain, water, snow, extreme heat and cold and similar conditions during handling,
transportation and storage.
- No direct heat sources shall be present in the warehouse area.
- Ensure that the floors where the operations are carried out are and clean and are not wet and slippery.
- Do not apply overload and do not lift during transportation.
- In case of repacking no humidity or wetness shall remain in the product.
- The product shall be stored in environments which are isolated from forces such as falling-tipping-shock-impact-vibration etc., shall
not be affected by disasters such as earthquakes, flood, fire etc., shall be stored in environments which are protected from corrosive
and wearing conditions (sun, atmosphere, rain, snow, humidity, water, external chemicals, etc.) in such a way as not to be affected by
weather conditions and being protected from dirt-sludge-contamination.
- Protection measures should be taken for the products by effective packaging against oxidation and ingress of foreign substances into
the inner surface of the products.
- Equipment and spare parts shall be kept in their original packaging until their installation at the final destination. When packages are
opened, it is necessary to verify the integrity of the materials contained.
- In case of any damages, report the detected damages to the suppliers who safeguard the original packaging to enable the
performance of necessary inspections.
- Do not take out the products from the original box and parcels unless they will be used and do not replace the box and parcel with
others.
13. LABEL INFORMATION
ERG-H5 Series
Summary of Contents for ERG-H5
Page 19: ...Page 19 of 32 Figure 11...
Page 20: ...Page 20 of 32...