Software Configuration with the GSDML Composer
5.11 Using GSDML File and CANopen-PN Gateway with the TIA Portal
INFORMATION
This chapter does only describe the steps which are relevant for the usage of the GSDML
file and the CANopen-PN gateway with the TIA Portal.
Please read the documentation of your TIA Portal for a detailed description.
5.11.1 Quick Start
Step
Action
see
page
NOTICE
To guarantee a proper operation of the CANopen-PN make absolutely
sure to use version 1.0.6 of the GSDML Composer, that is compatible with
the CANopen-PN firmware version 1.0.6, before you start with the software
configuration!
-
1.
Disconnect the online connection in your TIA-Portal, because the
hardware and software have to be complied in offline mode!
-
2.
Change into the project view of your TIA-Portal.
-
3.
Install the GSDML file as described in chapter „Installation of the GSDML
File“.
4.
Insert the CANopen-PN in your project, see chapter „Insert CANopen-PN
Hardware and Network Configuration“.
5.
Compile and load the hardware and software as described in chapter
„Compile and Download Hardware and Software“.
6.
Go online again. See Fig. 36.
CANopen-PN
Manual • Doc. No.: C.2921.21 / Rev. 1.6
Page 47 of 105
