Mini MIRI
®
Dry and Mini MIRI
®
Humidity Multiroom IVF incubators User Manual
Rev. 3.0
45
The N
2
pressure is shown in bar. External pressure must be between 0.4
–
0.6 bar (5.80
–
8.70 PSI) at all times. It cannot be adjusted on the Mini MIRI
®
Dry and Mini MIRI
®
Humid-
ity multiroom IVF incubator; it must be done on the external gas regulator.
Remember there is a pressure alarm on the pressure limits if the pressure
falls
below 0.3 bar or rises above 0.7 bar (4.40
–
10.20 PSI).
The internal pressure sensor cannot be calibrated by the user. Under normal
circumstances, the pressure sensor is replaced every 2 years according to the
maintenance plan.
19 Firmware
The firmware installed on your Mini MIRI
®
Dry or Mini MIRI
®
Humidity multiroom IVF
incubators is upgradeable. Whenever a critical update is available, it will be provided to
our distributors around the world
–
they will make sure that your Mini MIRI
®
Dry and
Mini MIRI
®
Humidity multiroom IVF incubator runs with the newest available firmware.
A service technician can do this during the scheduled annual service.
Please follow these steps to check the firmware which is currently installed on your unit:
1.
In the menu locate the Service sub-menu
“Serv”
and rotate the rotatory button
(
↻
). The display will show currently installed firmware version:
Ver 2.0 is only shown as an example. The current Mini MIRI
®
Dry multiroom IVF incuba-
tor firmware version is 1.4.2, and the Mini MIRI
®
Humidity multiroom IVF incubator firm-
ware version is 1.4.1.
2.
Rotate rotatory button (
↺
) to exit into the menu.
20 Safe sense function
There is a possibility to purchase the Mini MIRI
®
Dry or Mini MIRI
®
Humidity multiroom
IVF incubator with an integrated SAFE Sense system.
BCSI created this system to provide pH monitoring within a closed environment (an in-
cubator) to measure pH without disturbing the maintained optimal conditions.
