Ericsson SmartEdge 600, Hardware Manual

Page: 20 / 174

SmartEdge 600 Router Hardware Guide
Table 12 Craft Console Cable Pin Assignments
Signal Name
(1)
Signal Function Notes
RTS (output) Request to Send Not used
RI (input) Ring Indicator Not used
(1) The direction, input or output, is with respect to the controller card: input describes data flowing into the controller
card; output describes data being transmitted by the controller card.
1.14.2 Ethernet Crossover Cable
This shielded cable connects the Ethernet port on a PC to the Ethernet port
on a controller card. Both ends of the cable are terminated in standard RJ-45
eight-pin modular plugs.
Table 13 Ethernet Crossover Cable Pin Assignments
Other End
Signal Name Pin Notes
Tx (+) 3
–
Tx (–) 6
–
Rx (+)
1
–
– –
No connection
– –
No connection
Rx (–) 2
–
– –
No connection
– –
No connection
1.14.3 Ethernet Straight Cable
This shielded cable connects the Ethernet port on a controller card to a LAN
hub. Both ends of the cable are terminated in standard RJ-45 eight-pin modular
plugs.
Table 14 Ethernet Straight Cable Pin Assignments
Signal Name Notes
Tx (+)
–
Tx (–)
–
Rx (+)
–
–
No connection
–
No connection
Rx (–)
–
–
No connection
–
No connection
14
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09