Ericsson RX1290 Reference Manual Download Page 85

Page: 85 / 176

Options

6.11

MPEG-2 HD 4:2:2 Decode (RX1290/SWO/MPEG-
2/HD/422)

This option enables MPEG-2 HD 4:2:2 decode functionality.

6.12

MPEG-4 SD Decode (RX1290/SWO/MPEG4/SD)

This option enables MPEG-2 HD decode functionality.

6.13

MPEG-4 HD, SD MPEG-2, HD 4:2:2 Decode
(RX1290/SWO/MPEG-4/HD)

This option enables H.264 HD and SD and MPEG-2 HD 4:2:2 decode functionality.

6.14

DVB-S2 QPSK (RX1290/SWO/DVBS2/QPSK)

This option enables the DVB-S2 demodulator option card QPSK demodulation
functionality.

6.15

DVB-S2 QPSK and 8PSK (RX1290/SWO/DVBS2/8PSK)

This option enables the DVB-S2 demodulator option card QPSK and 8PSK
demodulation functionality.

6.16

DVB-S2 Low Symbol Rate (RX1290/SWO/DVBS2/LSym)

This option enables the DVB-S2 demodulator option card low symbol rate
demodulation functionality.

6.17

ProMPEG FEC (RX1290/SWO/IP/PROMPEG)

This option enables the IP Input option card ProMPEG functionality.

6.18

Four Channel Audio Support (RX1290/SWO/4AUD)

This option enables the receiver to simultaneously decode four separate stereo
pairs of audio. Four stereo pairs of audio supported for MPEG-1 layer 2 and AAC
audio only.

EN/LZT 790 0003/2 R1A

6-9

Summary of Contents for RX1290

















































































































































































Search results

Summary of Contents for RX1290

Reviews:

Brands by name

Popular brands

Ericsson RX1290, Reference Manual

Search results

Summary of Contents for RX1290

Reviews:

Brands by name

Popular brands