manualshive.com logo in svg

Ericsson RX1290, Reference Manual

Share
Download
Ericsson RX1290 Reference Manual Download Page 19

 

Introduction

 

 

Figure 1.5  Role of the Decoder 

1.5 

Control Modes 

1.5.1 

Introduction 

The Multi-Format Receiver is designed for unattended operation. Once set-up, the 
unit requires no further attention except to ensure the fans are working. There are 
up to three control modes associated with the Receiver (dependent upon options 
fitted). The unit remains in the chosen control mode until another mode is requested. 

Note:

  Local (Front Panel) Control is the factory default if Director is not installed. 

1.5.2 

Front Panel (Local) Modes 

Operating the Multi-Format Receiver from the Front Panel is via two main operating 
modes: 

Navigate

 and 

Edit

. See 

Section 3.3, Front Panel Operating Modes

.  

 

 

Figure 1.6  Front Panel States 

EDIT 

NAVIGATE 

EDIT On 

SAVE 

Timeout (5 minutes) 

EDIT Off 

EN/LZT 790 0003/2 R1A

 

 

 

 

1-11

 

Summary of Contents for RX1290

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands