Ericsson RX1290, Reference Manual

Page: 45 / 176

Operating the Equipment Locally
Pushbutton LEDs will be updated to indicate which pushbutton presses are still valid
as each navigation pushbutton press event is processed. For example, a lit
Up
pushbutton LED indicates there are pages above the current one.
3.3.3 Edit Mode
Edit mode edits the right display area and allows the user to alter control
parameters that define the Multi-Format Receiver behavior. To enter Edit mode
press the Edit pushbutton when on a page containing an editable control parameter
and the front panel is the controlling user interface. Edit may be entered on some
special pages at all times, for example on the page defining the controlling user
interface.
The Front Panel returns to Navigate mode when Edit is pressed again (abort edit
with no save) or when Save is pressed (save modified parameter values).
Processing of events from the front panel event queue depends on the current
operating mode of the front panel.
Table 3.2 Edit Mode
Action Result
Up Pushbutton Pressed Increases value of current edit parameter by one unit.
Down Pushbutton
Pressed
Decreases value of current edit parameter by one unit.
Left Pushbutton Pressed Moves cursor one edit parameter/parameter digit left (making
that the current edit parameter).
Right Pushbutton
Pressed
Moves cursor one edit parameter/parameter digit right
(making that the current edit parameter).
Edit Pushbutton Pressed Aborts edit (no save/action of any modified parameters) and
returns to Navigate mode, obtain and display current data.
Save Pushbutton Pressed Save/action new parameter values and returns to Navigate
mode, obtain and display current data.
Pushbutton LEDs are updated to indicate which pushbutton presses are still valid as
each edit pushbutton press event is processed. For example, when the
Left
pushbutton LED is lit it indicates there are additional editable parameters to the left
of the current cursor position. There is a maximum idle period of five minutes when
Edit mode will time out and return to Navigate mode.
3.4 Using the Local Controls
3.4.1 LCD Menu Descriptions
Detailed LCD menu descriptions are given in Annex C, Menus . This chapter
concentrates on describing the use of the menus for local operation.
EN/LZT 790 0003/2 R1A 3-7