Ericsson RX1290, Reference Manual

Page: 65 / 176

Operating the Equipment Locally
Step Action Result
6 Scroll to Menu 6.4 and edit the
AUDIO 2 menu (NO ALARM,
SET ALARM ONLY). Press
Save .
Edits the Audio 2 alarms menu.
7 Scroll to Menu 6.5 and edit the
AUDIO 3 menu (NO ALARM,
SET ALARM ONLY). Press
Save .
Edits the Audio 3 alarms menu.
8 Scroll to Menu 6.6 and edit the
AUDIO 4 menu (NO ALARM,
SET ALARM ONLY). Press
Save .
Edits the Audio 4 alarms menu.
9 Scroll to Menu 6.7 and edit the
MER menu (NO ALARM, SET
ALARM ONLY). Press
Save .
Edits the MER Error Rate (00.0 to 69.9) and
status menu.
10 Scroll to Menu 6.8 and edit the
BER menu (NO ALARM, SET
ALARM ONLY). Press
Save .
Edits the BER Error Rate (00.0 to 69.9) and
status menu.
11 Scroll to Menu 6.9 and edit the
EBNO menu (NO ALARM, SET
ALARM ONLY). Press
Save .
Edits the EBNO
12 Scroll to Menu 6.10 and edit the
TEMPERATURE menu (NO
ALARM, SET ALARM ONLY).
Press
Save .
Edits the Temperature menu.
3.11 Setting Up System Parameters (Menu 7)
This menu gives access to the Set-up Menu to set-up and edit System Parameters
as well as the Multi-Format Receiver Details menu (see
Table 3.42).
Table 3.41 Setting Up a System
Step Action Result
1 Go to Menu 7. Accesses the System menu.
2 Scroll to Menu 7.1 and edit the
Operating Mode (FRONT PANEL,
SERIAL REMOTE, NCP or NETWORK
(SNMP). Press
Save .
Edits the Operating Mode menu.
3 Scroll to Menu 7.1.1 and edit the LCD
Contrast (LOW, MEDIUM or HIGH).
Press
Save .
Edits the LCD Contrast.
4 Scroll to Menu 7.1.2 and edit the
SERIAL REMOTE PROTOCOL mode
(RS232 ALTEIA or RS485 ALTEIA). Select the interface needed for serial
remote control.
5 Scroll to Menu 7.1.3 and edit the IP
Address. Press
Save .
Edits the IP Address.
EN/LZT 790 0003/2 R1A 3-27