Ericsson RX1290, Reference Manual

Page: 148 / 176

Menus
C.3 The Menu Structure
Figure C.1 Menu Structure
Switch ON
Boot Screen
1 Preset Menu
2 Input Menu
3 Service Menu
4 Conditional Access Menu
5 TS Output Menu
6 Alarms Menu
7 System Menu
7 Date/Time
7.1 Setup Operating Mode
7.1.1 LCD Contrast
7.1.2 Serial Remote Protocol
7.1.3 IP Address
7.1.3.1 Subnet Mask
7.1.3.2 Gateway Address
7.1.4 Restore System Defaults
7.1.5 Service Hunt Mode
7.1.6 SI Mode
7.1.7 Customisation Key
7.2 IRD Details Electronic Serial No.
7.2.1 Software Version
7.2.2 Firmware Version
7.2.3 Hardware Version
7.2.4 PLD Version
7.2.5 Temperature
7.2.6 Model Number
7.3 System Restart
6.1 Transport Stream Alarm Setup
6.2 Video Alarm Setup
6.3 Audio Alarm 1 Setup
6.4 Audio Alarm 2 Setup
6.5 Audio Alarm 3 Setup
6.6 Audio Alarm 4 Setup
6.7 MER Alarm Setup
6.8 BER Alarm Setup
6.9 EBNO Alarm Setup
6.10 Temperature Alarm Setup
5.1 Output 1/2
5.2 Output 3
4.1 RAS Mode/RAS Key Setup
4.2 Common Interface
4.3 Director 5
4.4 Mode 1
4.5 Provider Lock
1 Presets Select
1.1 Presets Save
2.1 Input Select
2. Input
1. Presets
3.1 Video Selection
3.1.1 Resolution/Frame Rate
3.1.2 Coding Mode/Profile
3.1.3 GOP/Pixel/Aspect Ratio
3.1.4 Rate Buffer Level/Bit-rate
3.1.5 525/625 Line Output
3.1.6 Fail Mode
3.1.7 Test Pattern
3.1.7.1 Test Standard
3.1.8 Frame Sync
3.1.8.1 Frame Sync Offset
3.1.9 Video Delay
3.1.10 Output Mode
3.1.11 Trysync Mode
3.1.12 Embedded Audio 1 / 2
3.1.13 Embedded Audio 3 / 4
3.2 Audio 1 Selection
3.2.1 Sampling Rate/Bit-rate
3.2.2 Rate Buffer Level
3.2.3 Delay Adjustment
3.2.4 Digital Output/Routing
3.2.5 Clipping Level
3.2.6 AC3 Downmix Method
3.3 Audio 2 Selection
3.3.1 Sampling Rate/Bit-rate
3.3.2 Rate Buffer Level
3.3.3 Delay Adjustment
3.3.4 Digital Output/Routing
3.3.5 Clipping Level
3.3.6 AC3 Downmix Method
3.4 Audio 3 Selection
3.4.1 Sampling Rate/Bit-rate
3.4.2 Rate Buffer Level
3.4.3 Delay Adjustment
3.4.4 Digital Output/Routing
3.4.5 Clipping Level
3.4.6 AC3 Downmix Method
3.5 Audio 4 Selection
3.5.1 Sampling Rate/Bit-rate
3.5.2 Rate Buffer Level
3.5.3 Delay Adjustment
3.5.4 Digital Output/Routing
3.5.5 Clipping Level
3.5.6 AC3 Downmix Method
3.6 Async Data
3.6.1 Bit-rate/Status
3.7 Ethernet
3.7.1 Bit-rate/Status
3.7.2 Diagnostics
3.7.3 Gateway Setup
3.8 VBI Selection
3.8.1 VITC Insertion
3.8.2 Closed Caps
3.9 PCR Service
3.10 Network ID/Original Network ID
7. System
6. Alarms
5. TS Output
4. Conditional Menu
3. Service Selection
RX1290
EN/LZT 790 0003/2 R1A C-6