manualshive.com logo in svg

Ericsson RX1290, Reference Manual

Share
Download
Ericsson RX1290 Reference Manual Download Page 172

Language Abbreviations 

 

 

 

EN/LZT 790 0003/2 R1A

 

D-4 

 

 

 

Table D.2  Non-ISO Language Abbreviation Table 

Language Abbreviation 

MAIN ONE 

AUX TWO 

INTERNATIONAL SOUND 

INT  

AUDIO 1 

AAA 

AUDIO 2 

AAB 

AUDIO 3 

AAC 

AUDIO 4 

AAD 

AUDIO 5 

AAE 

AUDIO 6 

AAF 

AUDIO 7 

AAG 

AUDIO 8 

AAH 

AUDIO 9 

AAI 

AUDIO 10 

AAJ 

AUDIO 11 

AAK 

AUDIO 12 

AAL 

AUDIO 13 

AAM 

AUDIO 14 

AAN 

AUDIO 15 

AAO 

AUDIO 16  

AAP 

The non-ISO languages allow tagging of audio without reference to specific 
languages. The system can then transmit two languages (Main and Auxiliary) which 
could be any type of audio.  

Note:

  The non-ISO languages need to be user-defined in the MEM or Mobile 

Contribution Encoder for them to be available. 

For language codes not supported by the Multi-Format Receiver, the Receiver will 
list ‘undefined’ as the language descriptor. This does not affect the way the audio is 
selected. 

Summary of Contents for RX1290

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands