Deleting Groups From A Scan List
1.
With scan operation turned off, select the desired
group to delete from the selected trunked system’s
group scan list.
2.
Press
9
. The current status of the group is dis-
played for a time-out period.
3.
While the status is displayed, press
9
to delete
the group from the scan list.
,
or
turns off.
Any group that is not in a trunked system group scan
list will show a "blank" for the time out period when
it is the selected channel.
Nuisance Delete
A group can also be deleted from the scan list, if it is
not the currently selected group, by pressing
9
key
during scan operation while the radio is displaying the
unwanted group. The group will be deleted from the
system’s group scan list in the same manner as if done
using the steps above. Deletions done in this manner will
not remain deleted if the radio is turned off and then back
on.
SCANNING TRUNKED SYSTEMS
The radio can be programmed with the following
System Scan features. These features are automatically
enabled upon radio power up. A key or menu option is
also defined to allow the System Scan features to be
toggled during radio operation. This is covered in the
44
Summary of Contents for EDACS PRISM HP/LPE-200
