channel access tone sounds. Line one shows the
accompanying name selected from the list of stored
numbers. The message
displays on line
two. The radio then automatically transmits the pro-
grammed number stored in the special call queue.
3.
A telephone ring will be heard from the speaker.
When someone answers the phone, press the PTT
button and speak into the microphone. Release the
PTT button to listen to the callee. Unsuccessful
interconnect signalling returns the radio to the nor-
mal receive mode and the number remains displayed
until the special call is cleared or the time-out expires
or another group or system is selected. Terminate a
call by pressing the CLEAR/MONITOR button.
4.
To terminate the call, momentarily press the
CLEAR/MONITOR button.
Direct Dialing of Phone Calls (System Model only)
1.
If the phone number is not stored in the pre-stored
list of phone numbers, but the phone number is
known, it can be entered directly from the keypad.
Start by pressing the
*
. Then enter the required
number from the keypad.
*PHONE*
In half-duplex mode, only one person may talk at
a time. The radio PTT button needs to be pressed
in order to communicate to the individual called
and released for the individual called to be heard.
NOTE
53
Summary of Contents for EDACS PRISM HP/LPE-200
