data call is immediately terminated and the radio per-
forms the desired function:
•
PTT activated.
•
Emergency declared by pressing the pre-pro-
grammed emergency button.
•
A group or system change.
SCAN LOCKOUT MODE
Following the transmission or reception of a data call,
if scan is enabled, scanning will stop temporarily [two
independent pre-programmed times (after receive data
call and after transmit data call)]. During this time the
scan indicator will flash to indicate that scan is enabled
but temporarily suspended. This mode is normally exited
when the pre-programmed time expires; however, the
following actions will terminate the scan lockout mode
before the timeout is completed.
•
The CLEAR button is pressed.
•
The PTT is pressed.
•
A group or system change.
•
Entering phone call mode.
•
Entering individual call mode.
•
A new emergency assignment has been received.
81
Summary of Contents for EDACS PRISM HP/LPE-200
