Ericsson EDACS PRISM HP/LPE-200 Operator'S Manual Download

Page: 23 / 104

that is currently transmit-
ting.

DENIED

Call Denied

- Trunked mode only. Indi-

cates the radio is not
authorized to operate on
the selected system.

CC SCAN

Control
Channel
Scan

- Trunked mode only. Indi-

cates the control channel
is lost and the radio has
entered the Control Chan-
nel Scan mode to search
for the control channel.

WA SCAN

Wide Area
Scan

- Trunked mode only. Indi-

cates the control channel
is lost and radio has en-
tered the Wide Area Scan
mode to search for a new
system (if enabled
through programming).

TALKARND

Talk-around

- Conventional mode only.

Indicates the radio is oper-
ating on conventional
channels in talk-around
mode (no repeater).

SYSC ON

System Scan
Features On

- Trunked mode only. Indi-

cates the System Scan
features are enabled.

Summary of Contents for EDACS PRISM HP/LPE-200









































































































Search results

Summary of Contents for EDACS PRISM HP/LPE-200

Reviews:

Related manuals for EDACS PRISM HP/LPE-200

Brands by name

Popular brands

Ericsson EDACS PRISM HP/LPE-200, Operator'S Manual

Search results

Summary of Contents for EDACS PRISM HP/LPE-200

Reviews:

Related manuals for EDACS PRISM HP/LPE-200

Brands by name

Popular brands