TELEPHONE INTERCONNECT CALLS
Receiving A Telephone Interconnect Call (Trunked
Mode Only)
When the radio receives a telephone interconnect call
(a call directed only to the user’s radio), it unmutes on the
assigned working channel and turns on
. The first line
displays
.The second line displays
.
Proceed with the call.
Sending A Telephone Interconnect Call (Trunked
Mode Only)
Pre-Stored Number
Use the following procedures to initiate and complete
a Telephone Interconnect call:
1.
(System Model) To select a previously stored phone
number, press
*
.
turns on. Use the
<
,
>
keys to scroll through the list of stored numbers.
(Scan Model) To select a previously stored phone
number, press
M
. Use the
<
,
>
keys to
select the menu option "PHN CALL". Press the
M
key again then use the
<
,
>
keys to scroll
through the list of prestored numbers.
2.
Press and release the PTT button. When the radio is
clear to transmit,
turns on,
turns off and the
*PHONE*
*INDV*
52
Summary of Contents for EDACS PRISM HP/LPE-200
