Epson TM-L90 series, Programming Manual

Page: 656 / 679

C O N F I D E N T I A L
Paper roll Printing paper commands FS ( L Ver. 10.01 p. 656
FS ( L < Function 67 >
[Name] Feed paper to the print starting position
[Format] ASCII FS ( L
p
L
p
H
fn m
Hex 1C 28 4C 02 00 43
m
Decimal 28 40 76 2 0 67 m
[Range] ( p
L
+ p
H
×
256) = 2 ( p
L
= 2, p
H
= 0)
m = 48, 49, 50
fn
= 67
[Description] Feeds paper to the print starting position.
[Notes]
■
Use this function by using “the first state of the line” in standard mode.
■
This function is used when using label paper or black mark paper.
■
The paper feed operation is ended when no paper is detected in the paper feed to the print start position.
■
[Position information A] transmitted by Function 48 becomes (bit 2 = 1) when this function is processed.
Moreover, the print area of the label paper or black mark paper that the print position includes the print
start position becomes “current label,” and the following label of the current label becomes “next label.”
m
Function
48 Feeds paper to the print starting position on the next label. However, if the paper is
in standby at the print starting position, the printer does not feed.
49 Feeds paper to the print starting position on the next label. However, if the paper is
in standby at the print starting position, the printer feeds paper to the next print
starting position.
50 Feeds paper to the label peeling position. However, if the paper is in standby at the
label peeling position, the printer feeds paper to the next label peeling position.
Feeds paper to the print starting position on the current label. However, if the
paper is in standby at the print starting position, the printer does not feed.