manualshive.com logo in svg

Epson TM-L90 series, Programming Manual

Share
Download
Epson TM-L90 series Programming Manual Download Page 394

C O N F I D E N T I A L

Paper roll

Miscellaneous commands     

DLE DC4 (fn = 8)

 

Ver. 10.01

p. 394

DLE DC4 (

fn

 = 8)

E

XECUTING

 

COMMAND

[Name]

Clear buffer (s)

[Format]

ASCII

DLE DC4

fn

d1...d7

Hex

10

14

08 d1...d7

Decimal

16

20

8

d1...d7

[Printers not featuring this command]

TM-L60II

, 

TM-U230

, 

TM-U220

, 

TM-U210

, 

TM-U300A/B

[Range]

fn

 = 8

d1

 = 1, 

d2

 = 3, 

d3

 = 20, 

d4

 = 1, 

d5

 = 6, 

d6

 = 2, 

d7

 = 8

[Description]

Clears all data stored in the receive buffer and the print buffer and transmits Clear response.

[Notes]

■

Do not use this command in a system in which the printer is used with the OPOS driver and Java POS driver 
that are provided by Seiko Epson Corporation.

■

If a code string of this command is embedded within parameters of other commands (graphics data, 
defined data), the printer performs a buffer clear. If the printer has this command, be sure to check if the 
code string of this command is embedded within the parameters of another command before transmitting 
the bit-image data and defined data. 

■

This command is ignored in the following state:

•

During transmission of block data (Header ~ NUL)

■

This command is effective when the printer is disabled by 

ESC =

 (select peripheral device).

■

If this command is sent while another command is processing, processing of the other command is 
canceled.

■

If this command is processed in page mode, the printer returns to standard mode. The setting of 

ESC W

 is 

changed to the default value.

■

This command does not change or initialize settings of other commands (except for

 

ESC W

 with page 

mode selected).

■

Executing this command moves the print position to the beginning of a line.

■

If this command is executed when a recoverable error has occurred, the printer recovers from the error. 
This is the same function as the 

DLE ENQ2

 command.

Miscellaneous commands

Summary of Contents for TM-L90 series








































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands