Epson TM-L90 series, Programming Manual

Page: 543 / 679

C O N F I D E N T I A L
Paper roll Two-dimension code commands GS ( k Ver. 10.01 p. 543
GS ( k <Function 281>
[Name] MaxiCode: Print the symbol data in the symbol storage area
[Format] ASCII GS ( k
p
L
p
H
cn fn m
Hex 1D 28 6B
03 00 32 51 m
Decimal 29 40 107 3 0 50 81 m
[Range] (
p
L
+
p
H
×
256) = 3 (
p
L
= 3,
p
H
= 0
)
cn = 50
fn
= 81
m
= 48
[Description] Encodes and prints the MaxiCode symbol data in the symbol storage area using the process of <Function 280>.
[Notes]
■
In standard mode, use this function when printer is “at the beginning of a line,” or “there is no data in the
print buffer.”
■
If the symbol size exceeds the print area, the symbol cannot be printed.
■
If there is any error described below in the data of the symbol storage area, it cannot be printed.
• There is no data (Function 180 is not processed).
• When using only numeric characters, the data is more than 138 characters.
• When using alphanumeric characters, the data is more than 93 characters.
• When Mode 2 is selected, the Primary Message includes all data except the following.
Factor of Primary Message Number of data Character
Postal code 1 ~ 9 byte Numeric
ISO country code 1 ~ 3 byte Numeric
Class of service code 1 ~ 3 byte Numeric