Epson TM-L90 series, Programming Manual

Page: 495 / 679

C O N F I D E N T I A L
Paper roll Kanji commands FS – Ver. 10.01 p. 495
FS –
S
ETTING COMMAND
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS – n
Hex 1C 2D
n
Decimal 28 45
n
[Printers not featuring this command] TM-L60II , TM-P60
[Range] TM-J2000/J2100 , TM-T90 , TM-T88III , TM-L90 : 0
≤
n
≤
2, 48
≤
n
≤
50
TM-U220 , TM-U230 : n = 0, 1, 48, 49
TM-U210 , TM-U300A/B : n = 0, 1
[Default] n = 0
[Description] Turns on or off underline mode for multi-byte code character (Kanji-underline), using n as follows:
[Notes]
■
Settings of this command affect multilingual (except Thai) characters and user-defined characters.
■
Even if Kanji underline mode is specified, 90
°
clockwise-rotation characters, white/black reverse characters,
and spaces skipped by HT , ESC $ , or ESC \ are not underlined.
■
When a character size is changed, an underline width is not changed.
■
When underline mode is canceled, the following characters are not underlined; however, an underline
width set right before the mode is canceled remains.
■
Settings of this command are effective until FS ! is executed, ESC @ is executed, the printer is reset, or the
power is turned off.
■
Some printer models support Kanji underline mode with 2-dot width.
n
Function
0, 48 Turns off Kanji-underline mode
1, 49 Turns on Kanji-underline mode (1-dot thick)
2, 50 Turns on Kanji-underline mode (2-dots thick)
Kanji commands