Epson TM-L90 series, Programming Manual

Page: 179 / 679

C O N F I D E N T I A L
Paper roll Print position commands ESC \ Ver. 10.01 p. 179
ESC \
E
XECUTING COMMAND
[Name] Set relative print position
[Format] ASCII ESC \ n
L
n
H
Hex 1B 5C
n
L
n
H
Decimal 27 92
n
L
n
H
[Range] –32768
≤
(
n
L
+
n
H
×
256)
≤
32767
[Default] None
[Printers not featuring this command] TM-U230 , TM-U220 , TM-U210 , TM-U300A/B
[Description] Moves the print position to (
n
L
+
n
H
×
256)
×
(horizontal or vertical motion unit) from the current position.
[Notes]
■
The printer ignores any setting that exceeds the print area.
■
A positive number specifies movement to the right, and a negative number specifies movement to the left.
N pitch movement to the right: (
n
L
+ n
H
×
256) = N. Use the complement of N for setting N pitch
movement to the left: (
n
L
+
n
H
×
256) = 65536 – N.
■
When standard mode is selected, the horizontal motion unit is used.
■
When page mode is selected, the horizontal or vertical motion unit is used for the print direction set by
ESC T .
• When the starting position is set to the upper left or lower right of the print area using ESC T , the
horizontal motion unit is used.
• When the starting position is set to the upper right or lower left of the print area using ESC T , the
vertical motion unit is used.
■
Even if the vertical or horizontal motion unit is changed after changing the print position, the setting of
the print position will not be changed.
■
When underline mode is turned on, the underline will not be printed under the space skipped by this
command.
■
“\” corresponds to “\” in the JIS code system.
[Model-dependent variations] TM-J2000/J2100 , TM-T90 , TM-T88III , TM-L90 , TM-L60II
Print position commands