Epson TM-L90 series, Programming Manual

Page: 86 / 679

C O N F I D E N T I A L
Paper roll Print commands ESC K Ver. 10.01 p. 86
ESC K
E
XECUTING COMMAND
[Name] Print and reverse feed
[Format] ASCII ESC K n
Hex 1B 4B
n
Decimal 27 75
n
[Range] TM-U230 , TM-U220 , TM-U210 : 0
≤
n
≤
48
[Default] None
[Printers not featuring this command] TM-J2000/J2100 , TM-T90 , TM-T88III , TM-L90 , TM-P60 , TM-L60II ,
TM-U300A/B
[Description] Prints the data in the print buffer and feeds the paper n
×
(vertical motion unit) in the reverse direction.
[Notes]
■
The maximum paper feed amount depends on the printer model.
■
After printing, the print position moves to the beginning of the line. When a left margin is set, the
position of the left margin is the beginning of the line.
■
When standard mode is selected, the vertical motion unit is used.
■
When page mode is selected, the vertical or horizontal motion unit is used for the print direction set by
ESC T .
• When the starting position is set to the upper left or lower right of the print area using ESC T , the
vertical motion unit is used.
• When the starting position is set to the upper right or lower left of the print area using ESC T , the
horizontal motion unit is used.
■
When this command is processed in page mode, only the print position moves; the printer does not
perform actual printing.
■
This command is used to temporarily feed a specific length without changing the line spacing set by other
commands.
Print commands