Epson TM-L90 series, Programming Manual

Page: 638 / 679

C O N F I D E N T I A L
Paper roll Counter printing commands GS C 1 Ver. 10.01 p. 638
■
In a count-down setting, when GS c is executed, the counter value is below minimum value
( b
L
+ b
H
×
256), restart counting from the maximum value ( a
L
+ a
H
×
256).
■
In a count-stop setting, when executing GS c , the counter value is not changed.
■
When this command is executed, the internal counter which counts the repetition number of printing is 0.
■
This command does not change the counter value. The counter value is set by GS C 2 .
■
The settings for a range of a counter set by GS C ; , stepping amount of incrementing or decrementing of
a counter value, the repetition number of printing are disabled by processing this command.
■
Settings of this command are effective until GS C ; is executed, ESC @ is executed, the printer is reset, or
the power is turned off.
■
The value of the counter is updated when executing GS c .