Epson TM-L90 series, Programming Manual

Page: 88 / 679

C O N F I D E N T I A L
Paper roll Print commands ESC d Ver. 10.01 p. 88
ESC d
E
XECUTING COMMAND
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64
n
Decimal 27 100
n
[Range] 0
≤
n
≤
255
[Default] None
[Printers not featuring this command] None
[Description] Prints the data in the print buffer and feeds
n
lines.
[Notes]
■
The amount of paper fed per line is based on the value set using the line spacing command ( ESC 2 or
ESC 3 ).
■
The maximum paper feed amount is 1016 mm {40 inches}. If the specified amount exceeds 1016 mm
{40 inches}, the paper feed amount is automatically set to 1016 mm {40 inches}.
■
After printing, the print position moves to the beginning of the line. When a left margin is set in standard
mode, the position of the left margin is the beginning of the line.
■
When this command is processed in page mode, only the print position moves, and the printer does not
perform actual printing.
■
This command is used to temporarily feed a specific line without changing the line spacing set by other
commands.
Print commands