Epson TM-L90 series, Programming Manual

Page: 577 / 679

C O N F I D E N T I A L
Paper roll Customize commands GS ( E Ver. 10.01 p. 577
Msw 1-2: The receive buffer capacity differs, depending on the printer model.
Msw 1-4, 1-6, 1-7, 1-8: Activated only with the serial interface printers.
Msw 1-5: Activated only with the parallel interface printers.
•
When
a
= 2, memory switch 2 is set as follows:
1-2 48 Sets receive buffer capacity to “big”
49 Sets receive buffer capacity to “small”
1-3 48 BUSY when “receive buffer full” or “offline”
49 BUSY when “receive buffer full”
1-4 48 Data processing when occurring receive error: Replace with “?”
49 Data processing when occurring receive error: Ignore the data
1-5 48 Disables auto line spacing
49 Enables auto line spacing
1-6 48 DM-D (customer display) connection: disconnected
49 DM-D (customer display) connection: connected
1-7 48 Uses #6 pin for reset signal
49 Does not use #6 pin for reset signal
1-8 48 Uses #25 pin for reset signal
49 Does not use #25 pin for reset signal
Msw Setting value (
b
) Function
2-1 49 Reserved
2-2 48 Autocutter is provided
49 Autocutter is not provided
Msw Setting value (
b
) Function