manualshive.com logo in svg

Epson TM-L90 series, Programming Manual

Share
Download
Epson TM-L90 series Programming Manual Download Page 335

C O N F I D E N T I A L

Paper roll

Status commands     

GS r

 

Ver. 10.01

p. 335

 

TM-L90

■

Paper sensor status (

n

 = 1, 49)

When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute 
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end 
status.

When the roll paper cover is open, paper detection (detected by the roll paper end sensor) may be 
incorrect.

TM-L60II

■

Paper sensor status (

n

 = 1, 49)

When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute 
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end 
status.

TM-P60

Paper sensor status (

n

 = 1, 49)

Bits 0 and 1 are not supported.

When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute 
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end 
status.

When the roll paper cover is open, paper detection (detected by the roll paper end sensor) may be 
incorrect.

TM-U230

When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute 
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end 
status.

Summary of Contents for TM-L90 series








































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands