Making Prints From Slides or Negatives
31
En
g
lis
h
3.
Close the document cover completely.
Continue with the steps in “Printing Your Photos” on
page 31 to scan and print your photos.
Placing 35-mm Film Strips in
the Holder
1.
Open the film strip cover.
2.
Slide your negative or positive film strip into the
holder, under the tabs.
Note:
The photos should be mirror-imaged when viewed from
overhead. (The shinier side faces down; the duller side faces
up.)
3.
Close the film strip cover.
4.
Fit the holder’s tabs into the two small holes at the
front edge of the document table.
Make sure the film strip is in the middle of the
document table (not at the front edge) to align it
with the transparency unit window when you
close the cover.
c
Caution:
Make sure you do not press too hard on the document table.
5.
Close the document cover.
Continue with the steps in the next section to scan and
print your photos.
Printing Your Photos
Once you have placed your slides, negatives, or film
strips on the document table, you can view and select
the photos you want to print from the LCD screen. You
can choose from various sizes and types of Epson
paper.
1.
Load the type of paper you want to print on (
&
Top
Bottom
film strip is in the middle of
the document table
transparency unit window
match the film mark on
the holder with the film
mark on the document
table
Summary of Contents for Stylus Photo RX640 series
Page 51: ...51 English Memo ...
