Epson Stylus Color 670 Manual Download Page 24

Page: 24 / 196

1-8

Paper Handling

❏

Load the paper printable side up with the perforated margins
positioned as shown in the illustration.

❏

Use flat, undamaged paper. If the paper or the support sheet
is curled, flatten it before loading to avoid paper feeding
problems.

❏

Always place the included support sheet under the stack of
Photo Paper, but do not print on it.

❏

You can load up to 20 sheets of 4

6 inch Photo Paper or one

sheet of 200

300 mm Photo Paper into the sheet feeder.

❏

Do not fold the paper before printing.

❏

Cut or tear the paper at the perforation only after printing.

❏

Select

Photo Paper

as the Media Type setting and

Photo

Paper 4

6 in

Photo Paper 200

300 mm

as the Paper

Size setting in your printer driver.

Removing the perforated margins

Note the following when removing the perforated margins.

loading position

Summary of Contents for Stylus Color 670





































































































































































































Search results

Summary of Contents for Stylus Color 670

Reviews:

Related manuals for Stylus Color 670

Brands by name

Popular brands

Epson Stylus Color 670, Manual

Search results

Summary of Contents for Stylus Color 670

Reviews:

Related manuals for Stylus Color 670

Brands by name

Popular brands