Epson Stylus Color 670 Manual Download Page 155

Page: 155 / 196

Troubleshooting

9-13

❏

Set the adjust lever to the “+” position, and make sure the
Media Type setting in your printer driver is correct.

❏

Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.

❏

If you’re printing on glossy media or transparencies, place a
support sheet (or a sheet of plain paper) beneath the stack. Or,
load one sheet at a time.

❏

Run the Head Cleaning utility.

❏

Run the Print Head Alignment utility.

❏

Ink may have leaked inside the printer; wipe the inside of the
printer with a soft, clean cloth.

Warning:

Be careful not to touch the gears inside the printer.

Printouts Are Not What You Expected

If one of the following problems has occurred, try the solutions
listed for the problem.

❏

Incorrect or garbled characters

Wipe here

Summary of Contents for Stylus Color 670





































































































































































































Search results

Summary of Contents for Stylus Color 670

Reviews:

Related manuals for Stylus Color 670

Brands by name

Popular brands

Epson Stylus Color 670, Manual

Search results

Summary of Contents for Stylus Color 670

Reviews:

Related manuals for Stylus Color 670

Brands by name

Popular brands