Epson Stylus Color 670 Manual Download Page 18

Page: 18 / 196

1-2

Paper Handling

Loading Plain Paper

Follow the steps below to load plain paper in the printer.

1. Lower the output tray and slide out the extension. Next, slide

the left edge guide so that the distance between the edge
guides is slightly wider than the width of your paper.

2. Fan a stack of paper, then tap it on a flat surface to even the

edges.

3. Load the stack of paper in the sheet feeder with the printable

side up and the right edge of the paper resting against the
right edge guide. Then slide the left edge guide against the
left edge of the paper.

Note:

❏

Always load paper into the sheet feeder short edge first.

❏

Make sure the paper stack fits under the arrow mark inside the
edge guide.

Summary of Contents for Stylus Color 670





































































































































































































Search results

Summary of Contents for Stylus Color 670

Reviews:

Related manuals for Stylus Color 670

Brands by name

Popular brands

Epson Stylus Color 670, Manual

Search results

Summary of Contents for Stylus Color 670

Reviews:

Related manuals for Stylus Color 670

Brands by name

Popular brands