See the following table for more details on
A
to
E
.
Margin Position
Explanation
Available Setting
Range
A
Trailing edge
*1, *4, *5
The value set in
Bottom Margin
from the printer’s Printer Setup menu.
Applied before automatic cutting after printing.
5 to 150 mm
(0.20 to 5.91 in.)
B
Leading edge
*1, *6
The value set in
Top Margin
from the printer’s Printer Setup menu.
Applied before printing after loading media or cutting.
5 to 35 mm
(0.20 to 1.38 in.)
C
Right edge
*2, *3
The value set in
Right Margin
from the printer’s Printer Setup menu.
3 to 25 mm
(0.12 to 0.98 in.)
D
Left edge
*2, *3
The value set in
Left Margin
from the printer’s Printer Setup menu.
3 to 25 mm
(0.12 to 0.98 in.)
E
Between pages
*1, *4,
*5
The value set in
Margin Between Pages
from the printer’s Printer Setup
menu. Applied when printing continues without automatic cutting after
printing (half of the value set for after printing and half for before
printing).
5 to 999 mm
(0.20 to 39.33 in.)
*1
The set margin and the actual print results may differ depending on the RIP being used. Contact the RIP
manufacturer for more information.
*2
This may be available in the RIP depending on the RIP software being used. Contact the RIP manufacturer
for more information.
*3
If the total of the print data width and set left and right margins exceeds the printable area, a portion of the
data will not be printed.
*4
Automatic cutting may be available in the RIP depending on the RIP software being used. Contact the RIP
manufacturer for more information. If the RIP does not have an automatic cutting setting, the printer’s Auto
Cut setting is applied.
*5
When using the auto take-up reel unit (and the Auto switch is set to Forward/Backward), automatic cutting is
not performed while printing.
*6
The minimum top margin varies depending on the Pass Mode as shown in the following table.
SC-F6400 Series
Pass Mode
Minimum Top Margin
300x600dpi -1.1pass draft
8mm (0.31in.)
300x600dpi -1.1pass
8mm (0.31in.)
300x600dpi -1.5pass
16mm (0.63in.)
300x600dpi -2.3pass
24mm (0.94in.)
600x600dpi -2.1pass
5mm (0.2in.)
600x600dpi -3.0pass
5mm (0.2in.)
600x600dpi -4.0pass
5mm (0.2in.)
SC-F6400 Series/SC-F6400H Series User's Guide
Basic Operations
49
