Item
Parameter
Explanation
Media
01 XXXXXXXXXX to
10 XXXXXXXXXX
Choose the Media Settings to use. The registered name appears in
XXXXXXXXXX.
Media Type
Displays the currently selected Media Type.
Media Width
Sets the
Media Detection
items.
Advanced Settings
You can change the
Advanced Settings
for the registered media
selected in
Media
.
See the following table for details on the setting content.
U
“Media Management items” on page 80
Print Adjustments
Media Feed Adjust-
ment
Manual (Standard)
Use this menu if you notice banding or graininess in printing results.
See the following for more information.
U
“Optimizing Media Settings (Print Head Alignment and Media Feed
Manual
(Measurement)
Print Head Alignment
Media Management
01 XXXXXXXXXX to 10 XXXXXXXXXX
Change the registered Media Settings.
U
“Media Management items” on page 80
Press the
area to the right of
Media Settings
to copy the currently
selected settings to another media setting number, or initialize all
settings.
Remaining Amount Management
Remaining Amount
Management
On
When
On
is selected, you can set
Remaining Amount
and
Remaining
Alert
. Setting each item to manage the remaining amount makes it
easier to know when it is time to replace the media.
Once this is set to
On
, when you have loaded the media, you will be
prompted to enter the registered media settings number and the media
length (Remaining Amount).
Off
*
Remaining Amount
1.0 to 9999.9 m
(100.0 m
*
)
(3.3 to 32808.1 ft
[328.1 ft
*
])
Sets the total length of the loaded media. You can set in increments of
0.1 m (0.1ft). The amount of media remaining is estimated based on the
length you set here and the length of the printout, and is displayed on
the Home screen.
Remaining Alert
1.0 to 999.5 m (5.0
m
*
)
(3.3 to 3279.2 ft
[16.4 ft
*
])
Sets a value at which point a warning message is displayed to inform
you that the remaining amount of media is too low. You can set in
increments of 0.1 m (0.1 ft).
Print Length Management
SC-F6400 Series/SC-F6400H Series User's Guide
Control Panel Menu
79
