Epson S5U1C88348T, Manual

Page: 44 / 78

I-36
EPSON
S5U1C88348T OPERATION MANUAL
APPENDIX LIST OF EVENTS BY MODE
Status Mode Address book mode
Initial state following startup: Submenu in initial state
Submenu
nop
nop
nop
nop
Cannot be input
Cannot be input
First item selected
Second item selected
No action is taken when the cursor
is positioned at the first line of the
field. When positioned at the second
or subsequent lines, the cursor
moves to the closest character one
line above.
No action is taken when the cursor
is positioned at the bottom line of the
field. Otherwise, the cursor moves to
the closest character one line below.
When positioned at the first line of the field, the cursor moves to the beginning of the preceding field.
When positioned at the second or subsequent lines, the cursor moves to the closest character one line above.
When positioned at the bottom line of the field, the cursor moves to the beginning of the preceding field.
Otherwise, the cursor moves to the closest character one line below.
The cursor moves to the next character to the right. No action is taken when the cursor is positioned at a field terminator. When positioned at any other position
on the right edge, the cursor moves to the beginning of the next line.
Invalid
The cursor moves to the next character to the left. No action is taken when the cursor is positioned at the beginning of the field. When positioned at any other
position along the left edge, the cursor moves to the right edge of the preceding line.
Valid
Start selection mode
(initial state)
nop
First item selected state
301
New record input
Name field
After inserting a character, move the cursor to the right.
When positioned at a field terminator, the cursor does not move.
When positioned at the end of a line other than the field terminator, the cursor moves to the left edge of the next line.
Characters exceeding the field capacity are deleted.
Do nothing if the cursor is positioned at the bottom line of a field. Otherwise, start a new line and move the cursor to the left ledge of the next line. Characters
exceeding the field capacity are deleted.
First character (separator) selected state
311
Telephone number field
311/312
Cell phone number field
312
E-mail address field
313
Home address field
314
The cursor flashes –
–
nop
Power off
Top menu mode starts
Submenu mode starts
Initial state of new record input
Display the error message "NO NAME FIELD" when no data is found in the name field, "TOP CHAR IS C-RETURN" when the first character in the name field is
CR, or "USER MEMORY OVERFLOW" when no space is available in user memory. These messages are displayed for one second before the system reverts to
its previous state. Otherwise, save the data (in order of the character code in the name field, with entries having the same name sorted in the order in which they
were registered) before entering new record input mode.
The cursor moves to the next character to the left (no action is taken when the cursor is positioned at the top of the field, or the cursor moves to the right edge of
the preceding line when located on the second or subsequent line of the field) to delete the character. The separator cannot be deleted.
Delete the character at the cursor position. The separator cannot be deleted.
Submode
Detail
Initial setting
Design No.
General
key event
Number
Operation
key event
On/Off
Mode
Submode (Shift+Mode)
Enter
Esc
Erase
BS
Del (Shift+BS)
Char
Shift
Caps
Cursor (
↑
)
Cursor (
↓
)
Cursor (
→
)
Cursor (
←
)
Key repeat
Alphabet
Space
Kana (Char alphabet)
Symbol (Shift+No./alpha.)
C-Return (Shift+Enter)
[Address Book Mode 1]
System reset
Message display
→
Power off
Message display
→
Power off
Other
event
Reset key
Every second
Every 0.5 seconds
SVD error detected
KB is idle for 5 min.
Char state toggles
Shift state toggles
Caps state toggles