Epson S5U1C88348T, Manual

Page: 27 / 78

9 CLOCK MODE
S5U1C88348T OPERATION MANUAL
EPSON
I-19
9 C
LOCK
M
ODE
In this mode, the system displays date and time. To enter this mode, select "1. Clock" from the top menu.
Mode Enter
Enter Enter
→
←
Clock mode
Clock edit mode
Clock display
Selecting 12-hour display Selecting 24-hour display
Correct Confirm
Esc
Cancel
<TOP MENU>
1.Clock
2.Address Book
3.Calendar
1999/05/22 Sat
12:34:11 A
12 > 24
1999/05/22
12:34 A
Editing the date
(year, month, date)
12 < 24
1999/05/22
00:34
↑ ↓
12 > 24
1 999/05/22
12:34 A
Editing the time
↑ ↓
12 > 24
1999/05/22
1 2:34 A
Fig. 9.1 State Transition Diagram
The initial value of the clock when powered on and after a reset is 0:00 a.m. (24-hour display) January 1,
1999.
To set the current time
(1) Press the [Enter] key while the clock appears.
You are now in clock edit mode. Use the arrow keys [
↑
] or [
↓
] to move the cursor to 12-hour/24-
hour selection, year/month/day display, or hour/minute display.
(2) To change 12-hour/24-hour display, move the cursor to the top line and select "12" or "24," using
the arrow keys [
←
] or [
→
].
(3) To change year/month/day, move the cursor to the value to be changed, using the arrow keys [
↑
],
[
↓
], [
←
], or [
→
], then change the value using the numeric keys. The number where the cursor is at
will be taken over by a newly input number, and the cursor will move to the next position to the
right (except for the last column of the line).
(4) To change time, move the cursor to the value to be changed, using the arrow keys [
↑
], [
↓
], [
←
], or
[
→
], then change the value using the numeric key. If 12-hour display is currently selected, the
letter A (for a.m.) or P (for p.m.) is displayed after the time. To change a.m. to p.m. or vice versa,
press the [A] or [P] key while the cursor is positioned over the date or time line.
(5) Press the [Enter] key to exit clock edit mode and to return to clock display mode. The seconds
display starts from 0 at this point.
(6) To cancel editing changes and to return to clock mode, press the [Esc] key, or use the [Mode] key to
return directly to the top menu.