manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 109 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 109

5

5-9

RIP Station on a TCP/IP network with Windows NT 4.0

•

For Windows NT 4.0, install the AdobePS PostScript printer driver and RIP Station 
printer description on the Windows NT 4.0 server (see the Setup Guide). 

•

Repeat the installation for everyone who prints to the RIP Station.

Each server and workstation running the Fiery utilities with TCP/IP also needs the 
TCP/IP protocol and the Fiery utility software.

Configuring a Windows NT 4.0 server to support the RIP Station

To configure a Windows NT 4.0 server to communicate with the RIP Station, follow 
these general steps. More detail is provided in subsequent sections and in your 
Microsoft documentation.

• Load the TCP/IP network protocol on the server and configure it with an IP 

address, subnet mask, and gateway.

• Enter the host name of the RIP Station in the host database used by your system (see 

page 5-10).

• On the RIP Station Control Panel, perform Server Setup (see page 3-8), Network 

Setup (page 3-10), Printer Setup (page 3-33), PS Setup (page 3-35), and Color 
Setup (page  3-37).

• On the Windows NT 4.0 server, create a printer for each RIP Station print 

connection, install the appropriate printer drivers and (optionally) share the printer 
on the network (see page 5-11).

• Enter the host name and remote printer name of the RIP Station in the printer 

connection. See page 5-16 for more information.

• If the Windows NT 4.0 server is also a workstation, install the Fiery utilities (see the 

Setup Guide).

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments