manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 127 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 127

6

6-9

Troubleshooting the RIP Station

Runtime error conditions

For canceling jobs, calibration alerts, and error messages related to printing and 
calibration, see the User Guide and the Color Guide. See the User Guide for additional 
runtime error messages, including printer alerts to load media, and the 

Disk Full

 

message. These messages are reported by the Control Panel and the job management 
tools.

PostScript error reporting can be turned on as a print option from Mac OS 
applications that use a PostScript Level 2 or PostScript 3 driver or by setting the 
PS Setup option 

Print to PS error 

to

 Yes

.

Printer not ready

This message indicates that the interface cable between the RIP Station and the printer 
is not connected, or a print job is ready but the printer is not turned on.

Printer not found

Most failures to find a printer on the network are due to conflicting or missing name or 
address settings for the RIP Station. You must enter particular names in certain places. 
The required names are:

• TCP/IP host name (also known as the DNS name) defined by your organization.

Enter the host name as the Server Name in Server Setup.

• Remote printer (internal machine) name. Use one of the following:

print
hold

You must reconfigure one of the Fiery utilities on each workstation if you change the 
DNS name (also known as the TCP/IP host name) of the RIP Station.

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments